Provide a PLC with Ethernet Access to the Internet

Scenario

We have a PLC device with an Ethernet port that we want to provide with Internet access in order to send data to the Cloud. The PLC has a local IP address of 192.168.1.70

Solution

MTX-Router-Titan-II-S-4G AUS  3G/4G router

Details:

After the router has started, access the router’s configuration with the default username and password: “admin” and “admin”, using the default IP address“192.168.1.2”.

Check the configuration in the menus “Wan>Basic Settings” and make sure the APN, username and password are set correctly.

Remember that in order to work, the PLC’s IP address should be in the same range as the router’s LAN IP address and we should specify the PLC’s Gateway IP address with the router’s LAN IP address. In this example, it would be 192.168.1.2.

Made possible with

Contact us about Provide a PLC with Ethernet Access to the Internet
STAY UPDATED

The latest in Industry News