The MTX-Router-Titan II is an innovative industrial router that comprises a complete set of wireless and wired interfaces powered by an ARM Cortex-A7 processor module. By providing an easy integration and powerful interfaces, it avoids further hardware components.
It can be used in infinite M2M and IoT applications, and includes a 4G/3G cellular module with 700MHz Band 28 and fallback to 3G.
The MTX-Router-Titan II also includes advanced functionalities such as: DHCP server, MQTT, NAT, CSD call manager, 4G to RS232/USB gateways, external sensor dataloggers (temperature, distance, Modbus RTUs), DynDNS/NoIP client, GSM cell positioning, remote firmware upgrade, among others.
Multi-band magnetic base
Low profile panel mount
Multi-band panel mount
Standard 24VDC Plug Pack
24VDC DIN Mount Power Suppy
24VDC UPS Battery Charger for backup power supply
250mm DB9M to DB9F Ribbon cable
1.8m DB9M to DB9F RS232 Cable
Scenario We have a PLC device with an Ethernet port that we want to provide with Internet access in order to send data to the Cloud. The PLC has a local IP address of 192.168.1.70 Solution MTX-Router-Titan-II-S-4G AUS 3G/4G router Details: After the router has started, access the router’s configuration with the default username and password: “admin” and “admin”, using the default IP address“192.168.1.2”. Check the configuration in the menus “Wan>Basic Settings” and make sure the APN, username and password […]
Scenario We have a device with an Ethernet port which we want to access remotely via Internet using the TCP port 502. The Ethernet device has a local IP address of 192.168.1.70. We have to be able to access the router’s configuration remotely in the standard TCP port 80. We want to be able to remotely access the device. SIM cards with a dynamic/public IP addresses will be used, therefore we will use the DynDNS or No-IP services. Solution MTX-Router-Titan-II-S-4G […]
Scenario Titan mini routers have a digital input that can be used to send SNMP Traps, an SMS or an Email message, the following examples show how to configure a Titan router for this type of application. Solution In order to achieve our goal, we will use the section “Titan Scripts” of the Titan router, because if we end up needing more digital inputs (the Titan II router has 2 digital inputs), it would be necessary to use additional […]
Scenario details: We have a special display/LCD with a serial RS232 input. The data present in the RS232 port is shown in the display We need to remotely control the LCD using the MTX-Tunnel GPRS-Serial tunnel We can control the LCD in several ways: We could develop a code for the server PC and use the TCP/IP port socket to connect to MTX-Tunnel. This example shows how to do this in any third-party web page using a form. The form […]
Introduction VSPE (Virtual Serial Port Emulation) is a free software for 32 bit Windows operating systems. There is also a paid version for 64 bit platforms. This software can be utilised to allow legacy device software to connect to serial devices that only allow connections via a COM serial port, such as some data loggers, load cells etc. This software allows for the creation of virtual COM Ports on your PC (COM1, COM2, COM3, etc.) that are linked to a […]